Lockwood Locks & Hardware — Australia's #1 Security Brand Since 1878
When an Australian locksmith is asked what lock they recommend for a front door, the answer is almost always Lockwood. Founded in 1878 and now part of ASSA ABLOY — the world's largest lock group — Lockwood is the benchmark brand in the Australian locking industry, trusted by locksmiths, builders, facilities managers and homeowners for over 140 years. Every product in the Lockwood range is designed and tested in Australia for Australian conditions, conforming to Australian Standards and the specific demands of Australian door frames, climate and construction.
We stock the full Lockwood range — from the iconic 001 Deadlatch to mortice locks, deadbolts, lever sets, the designer Vivid and Velocity collections, and sliding door locks. As a licensed locksmith business with over 55 years of combined experience, we install Lockwood products every day. That means we stock the locks our own technicians trust, and we can advise on selection, specification, keying alike, master key systems and compliance requirements — not just sell you a box. Free shipping Australia-wide on orders over $100. Contact our team for expert pre-purchase advice.
The Lockwood Product Range
The Lockwood 001 Deadlatch — Australia's Most Installed Front Door Lock
The Lockwood 001 is not just a popular lock — it is the benchmark automatic deadlatch against which all other residential front door locks in Australia are measured. Designed in Australia for Australian doors, the 001 has been the go-to front door specification for locksmiths, builders and homeowners for decades, and for very good reason: it combines the highest residential security standards with innovative safety features that no comparable product matches.
Key features of the Lockwood 001:
-
Kinetic Defence® — bump and pick resistant cylinder, protecting against two of the most common lock bypass methods used by intruders
-
LockAlert® — a patented interior status indicator that shows lock mode at a glance: red for Secure Mode (locked both sides), green for Safety Mode (locked outside, free inside), green top for Passage Mode (free both sides). You always know your door's status without testing it
-
SafetyRelease™ — automatically unlocks the internal knob upon entry, minimising the risk of accidentally locking yourself inside
-
Cut-resistant stainless steel bolt — 18mm projection, resisting saw and shear attacks
-
11 concealed anchorage points plus a door frame strengthener — the installation is as strong as the lock itself
-
Hold back function — switch to passage mode from either side with external key or internal knob, for when you want the door to operate freely
-
Three operating modes — Secure (locked both sides, nobody home), Safety (locked outside, free inside, occupant present), Passage (free both sides, entertaining or moving through)
- Conforms to Australian Standard AS4145.2-2008 SL7D8C6
- 25-year manufacturer's warranty
- Compatible with most restricted keying systems via C4 keyway; can be keyed alike to other Lockwood C4 locks
Available in five finishes: Everbrass, Satin Chrome Pearl, Chrome Plate, Matt Black and Brown. Suits doors 30–45mm thick with a 60mm backset. Available in knob and lever operation, single and double cylinder configurations.
Lockwood Deadbolts — 303, 355 & Series
Lockwood's deadbolt range covers both single cylinder (key outside, thumb-turn inside) and double cylinder (key both sides) configurations for residential and commercial applications. The Lockwood 303 is a reliable single cylinder deadlock for domestic use. The Lockwood 355 is a robust double cylinder deadlock with security features suited to both domestic and commercial applications — hardened steel bolt, pick and drill resistant cylinder, and a clean profile that suits any door style. Available in satin chrome, chrome plate, matte black and brass finishes.
Lockwood Mortice Locks — Selector 3780 & 5782 Series
Lockwood's mortice lock range is the most specified commercial and high-security residential mortice lock system in Australia. Mortice locks are installed into a pocket cut into the door edge — providing significantly more strength and security than surface-mounted rim locks because the lock body is fully contained within the door itself.
The Lockwood Selector 5782 is the standard for narrow-stile aluminium and commercial hinged doors — heavy duty, field-configurable with a simple Red/Green hub selector for function setting (passage, combination, escape), holdback capable, anti-lockout selectable. Suitable for institutions, schools, hospitals, hotels, commercial buildings and high-security residential applications. The 3780 Series offers a broader range of selectable functions in one lock body — passage, privacy, classroom, store room and escape functions all configurable from under the faceplate without removing the lock.
Lockwood Velocity® Lever Sets — Contemporary Residential Hardware
The Lockwood Velocity series is Lockwood's residential lever handle range — contemporary designs on 63mm round roses, available in passage, privacy and dummy functions for consistent styling throughout the home. Designed in Australia, the Velocity range covers modern lever profiles (Element L3, Saltbush L34 and more) suited to contemporary and transitional Australian homes. Available in Matte Black, Brushed Satin Chrome, Satin Brass and Bright Chrome. A practical, well-priced option for homeowners and builders who want the security credibility of the Lockwood name on every door in the home, not just the front door.
Lockwood Vivid Collection — Designer Hardware with Security DNA
The Lockwood Vivid collection is Lockwood's premium design-led range — architecturally styled door handles, door stops, hinges and accessories that bring the Lockwood security pedigree into a premium interior hardware context. Available in Satin Brass, Matte Black, Brushed Satin Chrome and Polished Chrome. The Vivid range is for the homeowner who wants Lockwood's security reputation throughout the home with a more considered, designer aesthetic than the standard lever set range. Door stops in the Vivid collection — including the Half Moon door stop in Satin Brass — have become a sought-after detail in premium renovations.
Lockwood Nightlatches — 100 & 201 Series
Lockwood nightlatches are surface-mounted rim locks for timber frame doors — the traditional front door lock of Australian homes for generations. The Lockwood 100 is a general-purpose nightlatch for domestic and light commercial applications. The Lockwood 201 is an upgrade with a 6-pin cylinder for greater key security and compatibility with C4 restricted keying systems. Nightlatches are the simplest and most cost-effective front door lock for timber frame inward-opening doors, and Lockwood's are the most widely stocked and serviced in Australia — parts, cylinders and strike plates are universally available.
Lockwood Sliding Door Locks
Lockwood supplies a complete range of sliding door lock solutions for the patio, balcony and cavity sliding doors that are a fixture of Australian residential design. Keyed and non-keyed options, patio bolts, multi-point locks and sash-specific hardware — all designed for the aluminium and timber sliding door profiles most common in Australian homes. As the most widely serviced brand in Australia, Lockwood sliding door locks are also the easiest to source replacement parts for when repairs are needed.
Lockwood Padlocks
Lockwood padlocks are manufactured to the same standards as the rest of the range — hardened steel shackles, pick-resistant cylinders, weather-resistant construction. Available in a range of shackle lengths and body sizes for gates, sheds, storage units, trailers and high-security applications. Can be keyed alike to Lockwood door locks for single-key property access.
Lockwood Finishes
Everbrass® — Lockwood's proprietary warm brass-toned finish, specifically formulated for corrosion resistance in Australian conditions. Everbrass is more durable than standard lacquered brass and is Lockwood's recommended finish for external door applications where longevity is the priority. Available on the 001 deadlatch and selected other products.
Satin Chrome Pearl — A soft, slightly warm satin silver. The most versatile and popular finish in the Lockwood residential range — suits contemporary, transitional and classic Australian homes equally.
Chrome Plate — Bright, reflective silver. The standard chrome finish, suited to Art Deco, retro and contemporary applications.
Matt Black — Bold, contemporary. Increasingly specified across the residential and commercial range for modern and Hamptons applications.
Satin Brass (Vivid and Velocity ranges) — Warm, contemporary brass for design-led residential applications.
Why Locksmiths Specify Lockwood
As a licensed locksmith business, we do not just sell Lockwood — we install it. Here is why qualified locksmiths across Australia specify Lockwood above all other residential security brands:
Parts availability. Lockwood has the widest aftermarket parts network in Australia. Cylinders, strike plates, backsets, spindles and replacement components are available from virtually every locksmith supplier in the country. A Lockwood lock installed today will be serviceable in 20 years. An obscure import brand may not be.
Australian Standards compliance. Every residential Lockwood product is tested and rated to the relevant Australian Standard — AS4145.2-2008 for locksets, AS1905.1 for fire-rated applications. When you need to demonstrate compliance for insurance, building certification or tenancy disputes, Lockwood documentation is universally recognised.
Keying system compatibility. Lockwood's C4 keyway is the most widely supported keying platform in Australia. Master key systems, restricted key systems and keyed-alike setups built on Lockwood cylinders can be serviced by any qualified locksmith. This is critical for commercial properties, strata, rental portfolios and any application where key control matters.
ASSA ABLOY backing. As part of the world's largest lock group, Lockwood has engineering and R&D resources behind it that no independent brand can match. When Lockwood releases a security innovation — Kinetic Defence, SafetyRelease, LockAlert — it represents genuine engineering investment, not marketing language.
Frequently Asked Questions — Lockwood Hardware
What is the Lockwood 001 and why is it recommended by locksmiths?
The Lockwood 001 is Australia's most installed automatic deadlatch for residential front doors. It is recommended by locksmiths because it combines the highest available security rating for residential rim locks (AS4145.2-2008 SL7D8C6), Kinetic Defence bump and pick resistance, LockAlert status indication, SafetyRelease emergency exit function, an 18mm cut-resistant stainless steel bolt, and 11 concealed anchorage points — all in a proven, widely-stocked product backed by a 25-year warranty and full parts availability throughout Australia.
What is the difference between a deadlatch and a deadlock?
A deadlatch (like the Lockwood 001) has an automatic spring-loaded latch bolt that deadlocks when the door closes — the bolt engages automatically and can only be retracted with a key. A deadlock (like the Lockwood 355) requires you to manually turn a key to throw the bolt each time you lock the door. Deadlatches are more convenient for daily use — the door locks itself when you close it. Deadlocks provide an additional security layer and are commonly installed alongside a deadlatch on external doors for maximum security.
Can Lockwood locks be keyed alike?
Yes. Lockwood's C4 keyway system allows multiple locks to be keyed alike so all doors on a property operate with a single key. This applies across 001 deadlatches, 201 nightlatches, mortice locks and padlocks. Our locksmith team can arrange keyed alike setups and master key systems. Contact us with your lock model numbers for a quote.
What Australian Standard does the Lockwood 001 meet?
The Lockwood 001 is certified to AS4145.2-2008 SL7D8C6 — the Australian Standard for locksets and hardware for doors and windows, at Security Level 7, Durability Class 8, Cycle Class 6. This is the relevant standard for insurance compliance, building certification and tenancy agreement security requirements across Australia.
What is Lockwood Everbrass?
Everbrass is Lockwood's proprietary corrosion-resistant brass-toned finish, specifically formulated for Australian external door conditions. It is more durable than standard lacquered brass and is Lockwood's recommended finish for the 001 deadlatch and other external hardware in coastal, humid and high-UV environments.
What is the difference between the Lockwood 303 and 355 deadlock?
The Lockwood 303 is a single cylinder deadlock — key outside, thumb-turn inside — suited to standard residential security where the door is not adjacent to glass. The Lockwood 355 is a double cylinder deadlock — key required on both sides — suited to doors adjacent to glass panels where an intruder could reach through broken glass to operate a thumb-turn. The 355 has a more robust bolt and higher security specification than the 303.
What is a mortice lock and when should I use one?
A mortice lock is installed into a pocket (mortice) cut into the door edge — the entire lock body sits within the door, making it significantly stronger than a surface-mounted rim lock because there is no exposed case to lever off. Mortice locks are the standard for commercial buildings, schools, institutions, hospitals and high-security residential applications. The Lockwood Selector 5782 and 3780 series are the most specified commercial mortice locks in Australia.
What is the Lockwood Vivid collection?
Lockwood Vivid is Lockwood's premium design-led hardware range — architecturally styled door handles, door stops and accessories in Satin Brass, Matte Black, Brushed Satin Chrome and Polished Chrome. The Vivid range brings the Lockwood security and quality credentials into a more premium interior design context, suited to Hamptons, contemporary and transitional renovation projects where both aesthetics and security matter.
Are Lockwood locks suitable for fire doors?
Selected Lockwood products are tested and compliant for fire door applications under AS1905.1. As a licensed locksmith business, we can confirm specific product compliance for fire door applications and advise on the correct specification for your door, frame and fire rating requirements. Contact our team before ordering if fire door compliance is required.
How do I maintain a Lockwood lock?
Clean external surfaces with a dry cloth or a dilute solution of mild liquid detergent if needed — avoid abrasive cleaners. Lubricate the cylinder and latch bolt annually with a dry lubricant (graphite or PTFE spray) — avoid oil-based lubricants which attract dust and can gum up the mechanism. The 001 deadlatch's LockAlert indicator is battery-free and requires no maintenance. If the lock becomes stiff or the bolt does not retract cleanly, have a locksmith service it before it fails completely — a lock that is difficult to operate is one that is about to fail.
Can I buy Lockwood locks online and have them installed?
Yes. Order online with free shipping on orders over $100, and our licensed locksmith team can arrange installation across Melbourne's south-east and the Mornington Peninsula. We can also key your new locks alike to your existing Lockwood hardware — contact us when ordering to discuss keying requirements.
Lockwood Hardware — In-Store, Melbourne South East & Mornington Peninsula
We stock the full Lockwood residential and commercial range across all four stores. Our qualified locksmiths can advise on lock selection, security upgrades, keyed-alike setups and master key systems — in store or over the phone.
Braeside — 7/356 Lower Dandenong Road
Serving Mordialloc, Parkdale, Mentone, Cheltenham, Heatherton, Clarinda, Dingley Village, Moorabbin, Aspendale, Chelsea, Chelsea Heights, Patterson Lakes, Keysborough, Springvale and Clayton South.
Frankston — 18 Young Street
Serving Seaford, Carrum Downs, Langwarrin, Karingal, Frankston North, Frankston South, Sandhurst, Skye, Mount Eliza, Baxter, Bonbeach, Carrum and Patterson Lakes.
Mornington — 6/244 Main Street
Serving Mount Eliza, Mount Martha, Safety Beach, Baxter, Somerville, Tyabb, Moorooduc, Tuerong, Hastings, Bittern and Crib Point.
Rosebud — 3/851–855 Point Nepean Road
Serving Dromana, McCrae, Capel Sound, Tootgarook, Rye, Blairgowrie, Sorrento, Safety Beach, Arthurs Seat, Boneo, St Andrews Beach, Main Ridge, Red Hill and Portsea.
Buy Lockwood Hardware Online — Australia-Wide Delivery
We supply the full Lockwood range with free shipping Australia-wide on orders over $100. As licensed locksmiths we can arrange keyed-alike orders, master key systems, and on-site installation across Melbourne's south-east and the Mornington Peninsula. If you're not sure which Lockwood product is right for your door or security requirement — contact our team. This is what we do every day.
